CCG非鎧防爆格蘭（CCG 0541-A2F Single Compression Cable Gland）
CCG防爆格蘭代理商：上海頤品自動(dòng)化科技有限公司
關(guān)鍵詞：CCG非鎧防爆格蘭，CCG防爆密封接頭，CCG鎧裝防爆格蘭，CCG防爆填料函
CCG接管型防爆格蘭，CCG單密封防爆格蘭，CCG雙密封防爆格蘭， CCG帶填料膠水防爆格蘭
CCG防爆變徑接頭，CCG防爆堵頭，CCG防爆呼吸閥，CCG防爆轉(zhuǎn)接頭，CCG防爆接線盒等
CCG防爆格蘭代理商：上海頤品自動(dòng)化科技有限公司

CCG A2F Single Compression Cable Gland (0541)

CCG - Captive Cone Glands
Hazardous Cable Glands & Kits
Product overview

CCG A2F Compression Cable Gland (0541)

CCG A2F Compression Cable Gland (0541) is a Hazardous Area Glanding Device for Unarmoured Cable. Suitable for indoor, outdoor, Group I, II, III, Zone 1, 2, 20, 21 and 22 hazardous areas.

CCG Part Numbers: 054100-16S, 054100-16, 054100, 0541-0, 054101, 054122, 054102, 054133, 054103, 054144, 054104, 054155, 054105, 054166, 054106, 054177, 054107, 054108, 054199, 054109, 054110, 054111, 054112, 054113

Features & Benefits

• Passes the IECx / UKEX / ATEX 100% pull test, so no additional cable clamping is required.
• For indoor, outdoor, Group I, II, III, Zone 1, 2, 20, 21 and 22 hazardous areas.
• Fitted with a specially bulated elastomeric displacement seal, giving superior cable retention, explosion protection and IP rating.
• Precision manufactured from high-quality brass (Marine Grade Electroless Nickel Plated™) available in aluminium or stainless steel 316/316L on request. (Note: Aluminium is not suitable for Group I applications).
• Supplied with a thread sealing gasket (parallel threads only).

CCG A2F Technical Data

Type: A2F
Equipment Protection Levels: Ex db I/IIC, Ex eb I/IIC, Ex ta IIIC, Ex nR IIC
Gland Material: Brass (Marine Grade Electroless Nickel Plated™), Aluminium or Stainless Steel 316/316L
Seal Material: Standard Thermoset Elastomer or Extreme Temperature Seals
Sealing Gasket Material: HDPE, Nylon 66 or PTFE
Cable Type: Unarmoured
Sealing Area: Outer Sheath
Optional Accessories: Adaptor, Reducer, Earth Tag, Locknut, Serrated Washer and Shroud

Note: The installer should ensure that the materials are suitable for the installation environment.

Installation Standards

• IEC/BS EN
• IECEx
• ATEX
• UKEX
• INMETRO (Brazil)
• TR CU (Russia)
• CCC/CNEx (China)
• KCs (Korea)
• SANS
• Ingress Protection
• Deluge Protection
• Corrosion Protection
• Marine ABS
• DNV-GL
• ClassNK
• EMC Compatible

Hazardous Areas

A Hazardous Area is one in which there is potential for an explosion of gases, vapours, mists or dust or a combination of these. Such bs are petrochemical plants, offshore oil rigs, fuel filling stations, timber mills, coal mines, flour mills, paint spray booths, sewerage treatment plants, hospitals, explosive magazines and more.

Special precautions must be taken for the design, manufacture, installation and use of equipment and cable glands in such hazardous areas. Persons involved in selecting installing and maintaining electrical equipment for use in hazardous areas should be competently trained, have a full understanding of what a hazardous area is and have knowledge of the equipment protection levels and the installation standards involved.

Additional Technical Data on CCG A2F Compression Cable Gland (0541) Part Numbers can be found on the table below. For Conbing Standards & Certificates as well as Fitting Instructions, please advise PDF File.

Technical Data：